1x 300 Quadcopter Frame Kit Pure Carbon Fiber (1 set)
1x CC3D flight controller
1x 8p wire rod
2x 4p expansion path
2x 6030 (6x3 inches) Carbon fiber propellers CW
2x 6030 (6x3 inches) Carbon fiber propellers CCW
2x MT2204-2300KV CW motor
2x MT2204-2300KV CCW motor
4x Simon 12A ESC
In the package
300 Quadcopter Frame Kit (carbon fiber frame)
- Wheelbase: 295 (+/-3mm)
- Height: 98 (+/-3mm)
- Weight: 172g - Spare screws, self-locking nuts, and shock absorption ball are included
- Recommended motor, ESC and propeller: EMAX MT2204, EMAX Simon 12A ESC and 5"-6" propeller.
Frame structure overview
Note: You have two ways of assembling part as shown in the above diagram. Install motors as it is shown in the diagram on the right.
CC3D Flight Controller Introduce
OpenPilot is a next-generation Open source UAV autopilot. It is highly capable platform for multi-rotor crafts, helicopters, as well as fixed wing aircrafts. It has been designed from the ground up by a community of passionate developers from around the globe, with its core design principals being quality, safety, and complete flight plan scripting language and other powerful features.
OpenPilot is an extremely capable UAV autopilot platform.
6030 Carbon Fiber Propeller Specification
- Size: 6.0x3.0 inches
- Center hole: 5.1mm
- A pair: a piece of CW propeller, a piece of CCW propeller
MT2204 2300KV Motor Introduction
EMAX MT2204 2300KV motor use the Japanese NMB ball bearing, Japanese Kawasaki stator, Ndfeb with strong magnetic and high temperature resistance which decreasing heat generation during operation, increasing efficiency.
Comes with low CG design to help to decrease vibration when running, MT2204 motor is suitable for mini multicopters with better flight performance.
EMAX MT2204 2300KV Brushless Motor CW and CCW Thread
MT2204 2300KV Motor Specification
- KV: 2300
- Max Thrust: 440g
- Length: 32.2mm
- No.of cell: 2-3S
- Weight: 25g
- Framework: 12N14P
- Shaft: 3mm
- Propeller: 5-6"
- Diameter: 27.9mm
|7.4||Carbon Fibre Prop 6x3||6.4||240||51.2||4.7||11910|
|11.1||Carbon Fibre Prop 5x3||7.5||310||90.0||3.4||20100|
|Carbon Fibre Prop 6x3||11.5||440||138.0||3.2||16300|
Simon 12A ESC Feature
- Based on SimonK firmware, further optimized to the perfect drive performance and can be flashed with Blheli firmware.
- Quicker throttle response and better throttle linear.
Simon 12A ESC Specification
- Item: Simon-12A ESC
- Continuous Current: 12A
- Burst Current (10S): 15A
- Li-xx Battery (cell): 2-3
- Weight (g) wires included: 9
- BEC Mode: Linear
- BEC Output: 1A/5V
- Programmable: YES - Weight: 8g
Recommend battery (Not included in Combo)
1300mAh-2200mAh 3S Li-Poly battery