This SKYRC e4 AC balance charger is able to charger 2-4s lithium polymer batteries in balance mode at one time. The charging current can satisfy three modes from 1A to 3A according to the battery capacity.
The operation of SKYRC e4 LiPo Battery Charger is also very simple. There are two toggle switches in the charger which can be used to selected battery type and charge current. After you power on the charger, select the battery type and charge current, connect the battery and charger with the balance board, the charger will start working.
- AC Input Voltage: 100-240V, 50-60HZ
- Output Power: 20W
- Charging Current (Selected by Switch): 1A, 2A, 3A
- Battery Type (Selected by Switch): LiPo/LiFe
- Battery Cell Count: 2-4S
- Current Drain for Balancing: 200mA
- LED indicator: 4 LEDs for Balancing Indicator
- 1 LED for Charging Status
- Dimension: 69.4*110.7*40.5mm
- Weight: 176g
- Power supply built in: you could connect the AC power cord to the main AC socket directly.
- AC Input 100-240V: you could use this charger all over the world and don' need to worry about any damage caused by improper input voltage.
- Charge in balance mode: the voltage of each cell will be balanced so that the battery will be performed better and the cycle life will be longer.
1 x SkyRC e4 AC Balance Charger 2-4S
1 x 18AWG wire charging cable
1 x AC power cord
1 x EU Plug
1 x SkyRC e4 English user manual